I started using WP 5.1 for SCO (which was statically linked) since January, 1995. In the Spring, 1995, I obtained a copy of WP 6.0 for SCO (dynamic linked) and was able to install it with some pain. I subsequently have had some problems with the license manager. I have it running under 1.2.8.
This section is mainly from the original WordPerfect mini-howto. It has not been used in a long time. Note, the more recent versions of WP for SCO included both the dynamic and static linked versions, and hence did NOT require SCO's shared libraries. .:: hedgedoc.eclair.ec-lyon.fr ::.
This is mainly for background information! If you really want WP for Linux, get the new WP 7.0!
WP for SCO seemed to work fine (once the installation problems were overcome). I used this distribution for about 6-12 months until I received a copy of WP 6.0 for Linux (Caldera) and CND 1.0.
Contact SCO or visit their WWW page at http://www.sco.com
The kernel should be setup for module support and ELF support. If you have already done this, skip this step, else, do the following as root:
Loadable module support is required for iBCS2 and hence to run WP 6.0. Get the latest from the ftp sites, build it, and install it. If you have already setup your system for loadable modules, skip this step. Loadable module support (/sbin/insmod, /sbin/rmmod, /sbin/lsmod) is required. With recent kernels, genksyms is also required. .:: telegra.ph ::.
The iBCS2 emulator allows you to run SCO binaries such as WordPerfect 6.0. Get the latest from the ftp sites, build it, and install it.
The interfaces to some subsystems occur at the device layer and thus you need to create some device files in order to use them: .:: zenwriting.net ::.
* /dev/socksys and /dev/nfsd - interface for SVr3 STREAMS based
TCP/IP applications
# mknod /dev/socksys c 30 0
# ln -s /dev/socksys /dev/nfsd
[WARNING: the below may already be setup as /dev/inet,
/dev/arp, etc., they may have other major/minor numbers,
if so, skip this step]
* /dev/inet/{arp,icmp,ip,rip,tcp,udp} - more network hooks
# mknod /dev/inet/arp c 30 2
# mknod /dev/inet/icmp c 30 2
# mknod /dev/inet/ip c 30 2
# mknod /dev/inet/rip c 30 2
# mknod /dev/inet/tcp c 30 2
# mknod /dev/inet/udp c 30 2
[THIS IS REQUIRED AND WILL USUALLY HAVE TO BE DONE MANUALLY!]
* /dev/X0R - server side of SVR3 local X interface
(see comments in Doc/Local-X)
# ln -s /dev/null /dev/X0R
* /dev/spx - client side of SVR3 local X interface
(see comments in Doc/Local-X)
# mknod /dev/spx c 30 1
DO NOT VIOLATE SCO's COPYRIGHTS! You should get a copy of SCO's shared libraries and install them in /shlib. As root:
/shlib/libX11R5_s
/shlib/libXtXm*
Make sure that you have LOTS of space in your /tmp directory. If you do not have lots of space, make a tmp directory and set the environment variable TMPDIR to it. As root first try the following:
If you get the following error you may not have enough space in your /tmp directory, make a new tmp directory and set the environment variable TMPDIR (see above):
ERROR: not enough space in /tmp, or this is an unsupported machine.
If all else fails, you may have to do it manually per these notes:
cp -r WpTmP/wp60/SCO/* wp60
WordPerfect uses a license manager (see the manuals). This is a tricky beast that sometimes does not work properly under Linux (I have had it fail, done something else then I was able to start it). If you have problems call WordPerfect and they can assist you. Please RTFM the documentation section on the license manager.
To start the license manager, as root:
# cd $WPDIR/shbin10
# ./wplicense -s
If you get the errors:
/dev/XOR: No such file or directory Error: Can't open display: :0.0
You need to set up your DISPLAY environment variable (per above) and possibly setup the link to the device /dev/XOR (cd /dev; ln -s /dev/null /dev/XOR). .:: minerva212inez1996.wixsite.com ::.
Note if WP "steals" the colors from your X server (a problem if the depth is only 256 colors), disable the display of the graphics banner page by doing the following:
You will need to add a line to your /etc/rc.d/rc.local script (or similar) to start iBCS2 and the WP license manager (if desired).
# /sbin/insmod /usr/lib/modules/iBCS &
# $WPDIR/shbin10/wplicense -s &
This was extracted from my original notes and includes changes to install.wp that are reported to work:
The install.wp on the CDROM did not work out of the box. I had to modify it to get it to work by moving all files to a temporary directory and changing this install script. The changes are:
48c48,49 < mkdir $LNK_DIR 2> /dev/null --- > echo making LNK_DIR=$LNK_DIR > mkdir $LNK_DIR 51c52 < --- > echo removing /tmp/TMPTMP 53a55,57 > echo /tmp/TMPTMP= > cat /tmp/TMPTMP > echo /tmp/TMPTMP -- to here 62,63c66,83 < for i in $myfiles < do --- > echo MYFILES=$myfiles THISDIR=$thisdir > ls $myfiles > echo making LNK_DIR=$LNK_DIR/ifiles > mkdir $LNK_DIR/ifiles > chmod 777 $LNK_DIR/ifiles > cp $thisdir/ifiles/* $LNK_DIR/ifiles > chmod 777 $LNK_DIR/ifiles/* > ls -l $LNK_DIR/ifiles > > # echo making links.... > # $LNK_DIR/ifiles/cdlink.sco -r $thisdir > # echo links should be done... > # exit > > > # for i in $myfiles > i=$thisdir/ifiles/cdlink.sco > # do 65a86,87 > echo /tmp/TMP= > cat /tmp/TMP 73c95 < rm -f /tmp/TMPTMP --- > rm -f /tmp/TMPTMP 77c99 < done --- > # done 368a391,394 > echo THISDIR=$thisdir > thisdir=/usr/local/wp60/cdrom > echo THISDIR=$thisdir > 469a496,498 > echo INIT DONE, THISDIR=$thisdir > ls $thisdir/ifiles/cdinst.* > 493a523,526 > > echo RUN_ME=$RUN_ME > RUN_ME=$thisdir/ifiles/cdinst.sco > echo RUN_ME=$RUN_ME
I did not keep a detailed list of bugs for WP/SCO, however: