4.5. Configuring DOS using NCSA Telnet package

1. If you haven't installed your network card, do so now. Descriptions to perform this task is beyond the scope of this document. .:: coinfolk.net ::.

2. Load the appropriate packet driver. For example: an NE2000 Ethernet card set for I/O port 300 and IRQ 10, would need to be issued nwpd 0x60 10 0x300

3. Make a new directory, and then unpack the NCSA Telnet package: .:: partners.skanska.com ::. .:: www.tarsheedad.com ::. pkunzip tel2308b.zip

4. Use a text editor to open the config.tel file

5. Set myip=192.168.0.x (1 < x < 255), and netmask=255.255.255.0

6. In this example, you should set hardware=packet, interrupt=10, ioaddr=60

7. You should have at least one individual machine specified as the gateway, i.e. the Linux host:

   name=default host=yourlinuxhostname hostip=192.168.0.1 gateway=1

8. Have another specified as a domain name service:

   name=dns.domain.com ; hostip=123.123.123.123; nameserver=1

   Note: substitute the appropriate information about the DNS according what your Linux host uses [StackOverflow: Neo4j] [Web Specs: Data mining] .:: management.ju.edu.jo ::.

9. Save your config.tel file

10. As an initial test, ping the Linux MASQ server to test the network connection: .:: docs.google.com ::. ping 192.168.0.1 If you don't receive any replies, please verify your network configuration.